description the avago technologies plcc-4 family of smt leds is packaged in the industry standard plcc-4 package and is a extension of our plcc-2 smt leds. the product is able to dissipate heat more efciently compared to the con - ventional plcc-2 smt leds. in proportion to the increase in driving current, this family of leds is able to produce higher light output compared to the conventional plcc-2 smt leds. these smt leds have higher reliability and better per - formance and are designed to work under a wide range of environment conditions. this higher reliability makes them suitable for use in harsh conditions such as the interior automotive, electronics signs and signals and ofce automation and industrial applications. the super wide viewing angle at 120 makes these leds ideally suited for panel, push button, or general backlighting in automotive interior, ofce equipment, industrial equipment, and home appliances. the fat top emitting surface makes it easy for these leds to mate with light pipes. with the built-in refector pushing up the intensity of the light output, these leds are also suitable to be used as led pixels in interior electronic signs. these super high brightness leds can be used in localized area ambience lighting in applications such as vanity mirror light, cabin light, and car door puddle light. the white color backlighting is suitable to backlight color lcd screens in applications such as gps (global positioning system) screens in cars. to facilitate easy pick and place assembly, the leds are packed in eia-compliant tape and reel. every reel will be shipped in single intensity and color bin, to provide close uniformity. these leds are compatible with ir solder refow process. due to the high reliability feature of these products, they can also be mounted using through-the-wave soldering process. hsmw-a400-xxxxx surface mount led indicator data sheet features ? industry standard plcc-4 ? high reliability led package ? high brightness using ingan dice technologies ? high optical efciency ? super wide viewing angle at 120 ? available in 8mm carrier tape on 7-inch reel ? tight white color binning ? compatible with both ir and ttw soldering process applications ? interior automotive - instrument panel backlighting - central console backlighting - cabin lighting - navigation and audio system - dome lighting - push button backlighting ? electronic signs and signals - variable message sign - garden lighting ? ofce automation, home appliances, industrial equipment - front panel backlighting - push button backlighting caution: hsmw-a40x-xxxxx leds are class 2 esd sensitive. please observe appropriate precautions during handling and processing. refer to avago technologies application note an-1142 for additional details
2 package dimensions absolute maximum ratings (t a =25c) notes: 1. the luminous intensity i v , is measured at the mechanical axis of the lamp package. the actual peak of the spatial radiation pattern may not be aligned with this axis. 2. i v tolerance = 12 %. notes: 1. derate linearly as shown in figure 3 2. duty factor = 10%, frequency = 1khz device selection guide 0.8 0.3 3.5 0.2 2.8 0.2 0.5 0.1 3.2 0.2 2.2 0.2 1.9 0.2 0.1 typ. 0.8 0.1 cathode marking 0.7 0.1 c a note: all dimensions in mm. c c color part number min. i v (mcd) typ. i v (mcd) max. i v (mcd) test current (ma) dice technology white HSMW-A400-U00M2 450.00 700.00 - 30 ingan parameters hsmw dc forward current [1] 30 ma peak forward current [2] 100 ma power dissipation 114 mw reverse voltage 5 v junction temperature 110 c operating temperature - 40 c to + 100 c storage temperature - 40 c to + 100 c
3 electrical characteristics (t a = 25 c) notes: 1. the chromaticity coordinates are derived from the cie 1931 chromaticity diagram and represent the perceived color of the device. 2. ? is the of-axis angle where the luminous intensity is ? the peak intensity. 3. radiant intensity, ie in watts / steradian, may be calculated from the equation ie = i v / v , where i v is the luminous intensity in candelas and v is the luminous efcacy in lumens / watt. optical characteristics (t a = 25 c) color part number dice technology typical chromaticity coordinates [1] viewing angle 2 ? [2] (degrees) luminous efcacy v [3] (lm/w) luminous intensity / total flux i v (mcd) / f v (lm) x y typ. typ. typ. white hsmw-a400 ingan 0.31 0.31 120 260 0.45 part number forward voltagev f (volts) @ i f =20 ma reverse voltage v r @ 100 m a reverse voltage v r @ 10 m a typ. max. min. min. hsmw 3.8 4.6 - 5 figure 1. forward current vs. forward voltage. 0 5 10 15 20 25 30 35 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 forward voltage (v) forward current (ma)
4 figure 2. relative intensity vs. forward current figure 3. maximum forward current vs. ambient temperature. derated based on tj max = 110c. figure 4. radiation pattern 0 0.2 0.4 0.6 0.8 1.0 1.2 0 5 10 15 20 25 30 35 current (ma) relative intensity 0 5 10 15 20 25 30 35 0 2 0 4 0 6 0 8 0 100 120 ambient temperature - ?c maximum forward current - ma 300?c/w 350?c/w 470?c/w 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 -90 -70 -50 -30 -10 10 30 50 70 90 angle (degree) relative intensity
5 240 ?c max. 20 sec. max. 3? c/sec. max. 120 sec. max. tim e temperature 183 ?c 100-150 ?c - 6 ? c/sec. max. 60-150 sec. 3? c/sec. max. 217 ?c max. 120 sec. 6 ? c/sec. max. 3 ? c/sec. max. 125 ?c 25 ?c 255 ?c 60 to 150 sec. 10 to 20 sec. time temperatur e * the time from 25 ?c to peak temperature = 6 minutes max. +5 ?c -0 ?c figure 5b. recommended pb-free refow soldering profle. figure 5a. recommended snpb refow soldering profle. laminar wave bottom side of pc board hot air knife turbulent wave fluxing preheat 01 0 2 0 30 50 100 150 200 250 30 40 50 time - seconds temperature - c 60 70 80 90 100 top side of pc board conveyor speed = 1.83 m/min (6 ft/min) preheat setting = 150c (100c pcb) solder wave temperature = 245 c air knife air temperature = 390 c air knife distance = 1.91 mm (0.25 in.) air knife angle = 40 solder: sn63; flux: rma note: allow for boards to be sufficently cooled before exerting mechanical force. figure 6. recommended wave soldering profle.
6 figure 7b. recommended soldering pad pattern (ttw). figure 7a. recommended soldering pad pattern. 2.60 (0.103) solder resist represents electrical connectivity between pads 4.50 (0.178) y x 0.40 (0.016) x 0.50 (0.020) y 1.10 (0.043) 1.50 (0.059) dimensions in mm (inches). x x 0.5 (0.020) y y 1.0 (0.039) 2.0 (0.079) 2.0 (0.079) 6.0 (0.236) 3.0 (0.118) 2.8 (0.110) 6.1 (0.240) dimensions in mm (inches). represents electrical connectivity between pads solder resist thermal resistance solder pad area (xy) 300 c/w >16 mm 2 350 c/w >12 mm 2 470 c/w >8 mm 2
7 200 mm min. for ? 180 reel. 200 mm min. for ? 330 reel. trailer component leade r 480 mm min. for ? 180 reel . 960 mm min. for ? 330 reel . c a user feed directio n figure 8. tape leader and trailer dimensions. c a 4 0.1 2 0.05 8 0.1 5.5 0.05 12 +0.3 - 0.1 1.75 0.1 3.8 0.1 3.6 0.1 0.229 0.01 1.5 +0.1 - 0 1 +0.1 - 0 c c 3.45 0.1 a a view a- a view b- b b b all dimensions in mm. figure 9. tape dimensions. figure 10. reeling orientation. cathode sid e printed labe l user feed direction
8 moisture sensitivity this product is qualifed as moisture sensitive level 2a per jedec j-std-020. precautions when handling this moisture sensitive product is important to ensure the reliability of the product. do refer to avago application note an5305 handling of moisture sensitive surface mount devices for details. a. storage before use - unopen moisture barrier bag (mbb) can be stored at <40c/90%rh for 12 months. if the actual shelf life has exceeded 12 months and the hic indicates that baking is not required, then it is safe to refow the leds per the original msl rating. - it is not recommended to open the mbb prior to assembly (e.g. for iqc). b. control after opening the mbb - the humidity indicator card (hic) shall be read immediately upon opening of mbb. - the leds must be kept at <30c / 60%rh at all time and all high temperature related process including soldering, curing or rework need to be completed within 672 hours. c. control for unfnished reel - for any unuse leds, they need to be stored in sealed mbb with desiccant or desiccator at <5%rh. d. control of assembled boards - if the pcb soldered with the leds is to be subjected to other high temperature processes, the pcb need to be stored in sealed mbb with desiccant or desiccator at <5%rh to ensure no leds have exceeded their foor life of 672 hours. e. baking is required if: - 10% or 15% hic indicator turns pink. - the leds are exposed to condition of >30c / 60% rh at any time. - the leds foor life exceeded 672 hours. recommended baking condition: 605c for 20 hours.
9 bin id min. (mcd) max. (mcd) s1 180.00 224.00 s2 224.00 285.00 t1 285.00 355.00 t2 355.00 450.00 u1 450.00 560.00 u2 560.00 715.00 v1 715.00 900.00 v2 900.00 1125.00 w1 1125.00 1400.00 w2 1400.00 1800.00 x 5 min i v bin x 6 0 full distribution 3 3 half bins starting from x 5 1 4 4 half bins starting from x 5 1 5 5 half bins starting from x 5 1 7 3 half bins starting from x 5 2 8 4 half bins starting from x 5 2 9 5 half bins starting from x 5 2 x 7 0 full distribution z a and b only y b and c only w c and d only v d and e only u e and f only q a, b and c only p b, c and d only n c, d and e only m d, e and f only 1 a, b, c and d only 3 b, c, d and e only 4 c, d, e and f only 5 a, b, c, d and e only 6 b, c, d, e, and f only color bin select (x 7 ) individual reel will contain parts from one full bin only. intensity bin select (x 5 x 6 ) individual reel will contain parts from one half bin only tolerance of each bin limit = 12% intensity bin limits
for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies, limited in the united states and other countries. data subject to change. copyright ? 2007 avago technologies limited. all rights reserved. obsoletes av01-0435en av02-0497en - august 29, 2007 bin id limits (chromaticity coordinates) a x 0.352 0.365 0.365 0.352 y 0.377 0.395 0.360 0.341 b x 0.340 0.352 0.352 0.340 y 0.360 0.377 0.341 0.325 c x 0.327 0.340 0.340 0.327 y 0.342 0.360 0.325 0.306 d x 0.315 0.327 0.327 0.315 y 0.325 0.342 0.306 0.290 e x 0.302 0.315 0.315 0.302 y 0.307 0.325 0.290 0.271 f x 0.290 0.302 0.302 0.290 y 0.290 0.307 0.271 0.255 color bin limits tolerance of each bin limit = 0.02 packaging option (x 8 x 9 ) option test current package type reel size m2 30 ma top mount 7 inch
|
